机载蒸发循环系统结构的稳健性研究

机载蒸发循环系统结构的疲劳寿命易受外界和内部环境的影响,导致无法满足设计要求。采用随机有限元法,参照设计变量和随机变量的变异性,建立机载蒸发循环系统结构疲劳寿命稳健性优化的数学模型;通过引入权因子α,将稳健性优化问题转化为结构疲劳寿命均值和标准差的双目标优化问题。结果表明:合理设置疲劳寿命均值和标准差的权因子,可有效降低设计变量和随机变量对变异的敏感性,进而提高机载蒸发循环系统结构疲劳寿命的稳健性。     

测控雷达伺服系统整流电路的建模与仿真

电力电子整流电路是测控雷达伺服系统的重要组成部分。某型测控雷达采用了三相零式反并联可逆整流电路结构。分析了整流电路可逆运行的工作原理以及晶闸管触发电路的控制方式,利用MATLAB/Simulink的建模功能,建立了触发脉冲产生电路和整流电路的模型,仿真得出系统可逆运行时电机的工作状态以及整流电路输出电压波形。仿真结果显示,此整流电路可以实现电机的四象限运行,所建模型正确。利用该模型可以对测控雷达伺服系统的分析和设计起到很好的辅助作用。     

用户星中继终端在轨应用策略

在介绍在轨用户星中继终端的分类、功能和使用现状的基础上,重点对用户星中继终端多约束条件进行了梳理分析。为缓解常态化应急测控带来的资源紧张矛盾,提出了用户星中继终端在轨应用策略,即Ka/S模式下影随测控,小S模式下定时捕获。针对Ka+小S模式下实现影随测控的可行性问题,利用STK(Satellite Tool Kit,卫星开发工具包)软件进行了仿真计算分析,结果表明:为实现影随测控,满足测控快速响应需要,要求星载S频段中继测控天线对中继卫星的覆盖范围,应大于星载中继数传天线对中继卫星的覆盖范围。     

工艺方法对某结构形式的强度影响研究

以某结构形式为例,研究了加工工艺对其强度、尤其是疲劳强度的影响,讨论了产生裂纹的原因,提出了工艺改进措施并得到了试验验证。结果表明,结构根部的应力集中是疲劳强度降低并出现裂纹的原因,加工工艺对疲劳强度有较大影响,改进工艺后,该结构根部应力集中程度降低,抗疲劳性能明显改善。     

航空通信中基于PN码的信道估计算法研究

航空移动通信系统（空空信道）中,大的多径时延和多普勒频移会造成非常严重的符号间干扰,高速宽带下尤为突出,使得传统的频域信道估计算法不得不通过提高运算长度和复杂度来实现性能,而航空通信对实时性的要求使其难以工程实现。本文针对空空信道时延长而衰落小的条件,提出一种基于PN码的时域信道估计算法,连续发送N段m序列作为训练序列...     

现代飞机数字化柔性装配生产线

导读：数字化柔性装配生产线的应用是现代飞机装配的典型特征之一。通过研究飞机数字化柔性装配生产线的特点及其在国内外飞机装配中的应用现状,总结了构建现代飞机数字化柔性装配生产线的六项关键技术。并论述了各项技术之间的关系。阐述了构建柔性装配生产线的意义,并对其具体实施提出了思路及建议,可为国内发展应用数字化柔性装配生产线提供...     

大型民用客机液压系统的对比与分析

通过对波音787和A380液压系统的分析和研究,探讨了5000psi液压系统关键技术。     

Inversion of satellite gradiometry data using statistically modified integral formulas for local gravity field recovery

The satellite gravity gradiometric data can be used directly to recover the gravity anomaly at sea level using inversion of integral formulas. This approach suffers by the spatial truncation errors of the integrals, but these errors can be reduced by modifying the formulas. It allows us to consider smaller coverage of the satellite data over the region of recovery. In this study, we consider the second-order radial derivative (SORD) of disturbing potential (T_rr) and determine the gravity anomaly with a resolution of 1° × 1° at sea level by inverting the statistically modified version of SORD of extended Stokes’ formula. Also we investigate the effect of the spatial truncation error on the quality of inversion considering noise of T_rr. The numerical investigations show satisfactory results when the area of T_rr coverage is the same with that of the gravity anomaly and the integral formula is modified by the biased least-squares modification. The error of recovery will be about 6 mGal after removing the regularization bias in the presence of 1 mE noise in T_rr measured on the orbit.     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

空间自旋目标平动补偿与微动特征提取方法

针对空间自旋目标平动补偿与微动(m-D)特征提取问题，提出一种基于延时共轭相乘和微动分解的平动补偿与特征提取方法。该方法通过延时共轭相乘处理实现目标加速度估计，然后构建冗余的微动原子集，对加速度补偿后信号进行微动分解补偿，通过搜索补偿信号的最大谱峰获取目标的微动特征与速度信息。仿真试验表明,所提方法能够有效估计空间自旋目标的运动参数，并快速提取其微动特征。